How to get moisture out of tail light lens?

(2010-11-02 14:10:18) 1. Palmz Says: My BMW's tail light has recently been collecting moisture and I'd like to get it out as soon as possible, as I'm not sure how frost will affect it. There are no holes or cracks ( I took it off and inspected it ) visible. Buying a new one isn't an option now, they work just fine otherwise.2. joe Says: Put one or two of those silica gel packets inside of it, like the kind that's used to package electronics. Apply Vaseline around the O-ring seals for your light sockets, it might be where you have air leaks allowing moisture inside. When you have the time take out the lenses and check the seams, and use a good quality clear silicone to seal them if the seams are splitting (typical).3. shaun d Says: take it off tip out any moisture then dry it out with a hair dryer put new sealer around it and replace it then use a non setting sealer around the bulb holders should stop it Tag: How to get moisture out of tail light lens?