How would one go about slicing a tire?
(2011-01-27 15:20:12) 1. Says: what would they use, how would they get away with it..and anything else you can tell me2. Says: Tires are surprisingly tough so first off a strong arm, firm grip and a short blade tough tool will be needed. A box cutter, just won't cut it. you'll be hacking away at it like a lunatic. A heavy bladed retractable razor knife is just the kit. When the tire is cut it will make a racket as it deflates so a warm still summers night is not the time to do it undetected. A windy rainy gale of a night provides cover. Easier to nip off the valve stem with an electricians wire cutter but you asked how to slice. Illegal of course, so I am assuming this is an intellectual exercise. I do not condone vandalism.3. Says: it is easy just a blade would do , don't know what they are referred to in u.s.a. but a " stanley knife " if its a slice on the side its possible , but tyres are susceptible to puncture and can crack if you mount the kerb often or run with low tyre presure .4. Says: If you are planning on doing this, are you also planning on sitting in jail, or getting the $#IT beat out of you?5. Says: Do it at night. get some sort of kitchen knife/blade. and wear black.WARNING: random guy can and will not be responsible for the slashing of tires6. Says: It shouldn't be hard. A knife or box cutter would do the job. It probably isn't the right thing to do ethically though.7. Says: ONE would have to be a vengeful idiot, with no common sense to slash a tire.8. Says: Don't do it , chances are that the person is not worth it...................................9. Says: Best way is to slice the tires stem that sticks out.10. Says: I hope you know that this is an illegal act.11. Says: Absolutely evil you must be.......12. Says: You have a lot of growing up to do.13. Says: too much effort. just key the car.14. Says: and you would wish to do this why???15. Says: one would not do this Tag: How would one go about slicing a tire?